Mega Diamond Locator is a new version of this device, the first of its kind from the company Mega Locators Germany,
which developed in this release and improved many features and details in the program and electronic circuits to provide the best performance.
Mega Diamond Locator is the first device that allows the prospector to search and detect
several precious gemstones kinds found in the ground, such as sapphires, emeralds and others,
as well as the discovery of natural diamonds.
The search system in the device is a long-range locator system that gives the possibility
of searching with a very wide field of scan (2500m) and detecting gemstones at very deep depths (up to 60m).
However the device is easy to use through a very simple program with an attractive graphical interface
enables the user to easily choose the search program from the predefined programs for different gemstones
and then set the distance of the front scan and depth field and start searching directly
Mega Diamond Locator Features
Mega Diamond Locator is based on the long-range scanning system the best-of-its-kind
Mega Detection technology to detect buried underground targets.
How Long-Range Locator System Works?
Two antennas are used to receive signals coming from buried targets with a signal booster
to enhance the reception of the weakest incoming signals (mounted above the search unit)
The antenna is installed within the search unit located in the front of the device, before conducting the search ,
the user must choose the search program, for example the emerald program and then the device will search for
emeralds only and these antennas with the movement of the user forward , search within the specified field
of the front scan and move the antennas by the location and direction of the buried target ,
and by repeating the process from four directions the user can limit the location of the
target within a small area – such as a square area along the length of 1 meter – in order to obtain more accurate results.
After limiting the target within the small area, then the depth of the target can be calculated using
Deep Master (depth measurement unit).
Search Programs in Mega Diamond Locator
There are several programs in the device software program to search for different types of gemstones
so you can choose the search program through the search mode menu and start to detect this type of gemstones directly.
Diamond Programs: Small Diamonds – Large Diamonds
10 programs for gemstones featuring the following programs:
after selecting the search program, the device loads its settings and then the user
can set the front scan distance and the depth to start the search process.
Calculate the target depth
After conducting the search and assigning an approximate location to the potential target,
Then Deep Master unit can be used to calculate a rough approximation of the depth of the target found underground.
The depth measurement unit (Deep Master) consists of metal wedges mounted in the bottom of the unit
with two antennas installed on its two side.
Then the unit injects electrical energy into the ground through the wedges.
So the unit is inserted in the center of the target area and the user starts moving from the planting point away from the target.
The depth of the target is the distance between the place of the unit and user’s current position.
Note: For more accurate calculation of depth, this process can be performed more than once
and from several different directions. In this case, the depth is the average of these measured distances
Easy to use Program
Mega Diamond Locator 2020 has an easy-to-use program for both beginners and professionals
with a graphical user interface available in multiple languages, plus a multi-screen menu system
So the software program allows the user to select and adjust different settings via the buttons
in the control panel at the bottom of the screen, where he can modify the different options,
including selecting the language of the program and choose the search program and adjust the front distance and depth … etc.
The device is designed to facilitate the carrying and transfer and use in the fields of search for metals and gold,
where the device is lightweight and with the design of the unique handle enables the prospector to carry the device
and ensure its balance when searching and ensure more accurate results.
The main unit includes a color TFT LCD screen and a screen of control panel consisting of a variety of buttons
used to control the device software and change the different settings on the display.
Lithium – Ion Batteries for Long Operating Time
The device equipped with lithium-ion batteries that are located on the side of the main unit
within their own cavity and can be easily disassembled and replaced with alternative batteries.
The batteries provide a long operating time for the prospector when searching out in the detection fields.
The batteries can be charged with the supplied charger in the bag from any electrical outlet.
There is also a special charger for the car to charge the device from the battery of any car and this gives
the prospector more operating time when prospecting and searching in remote areas
and far from cities and villages where there is no electrical source to charge the device.
We are orient detectors, providing latest gold detectors , metal and underground water detectors from international authorized manufacturers at best prices.
Take advantage of our constant offers and downloads on the prices of devices, and we also offer gifts to our customers periodically.
Last Updated on December 31st, 2020