CTX 3030 vs Impact Metal Detector – All you need to know

CTX 3030 vs Impact Metal Detector – All you need to know

Metal detectors work by transmitting an electromagnetic field from the search coil into the ground. Any metal objects within the electromagnetic field will become energized and re-transmit an electromagnetic field of their own. The detector’s search coil receives the re-transmitted field and alerts the user by producing a target response.

The frequency of a metal detector is one of the main characteristics that determines how well targets can be detected. Generally, a single frequency detector that transmits at a high frequency will be more sensitive to small targets and a single frequency detector that transmits at low frequencies will give more depth on large targets.

Discrimination is a metal detector’s ability to identify buried targets based on their conductive and/or ferrous properties. By accurately identifying a buried target you can decide to dig it up or consider it as junk and continue searching.

Very Low Frequency (VLF)

This type of metal detector uses two coils, one sends and the other receives, to pick up on targets in the ground. The sender coil creates a magnetic field that reacts to metal objects. When a target is found, a current is formed, the receiver coil takes the signal and amplifies it to be heard through a speaker or headphones. Many detectors can even translate the signal into a number based on how strong the magnetic current is.

Because of its ability to give information back on targets, there are lots of metal detectors that use VLF technology. The control box is where the magic happens with this type of detector. It interprets the signal and turns it into easy to understand visual and audio cues. Depending on how much work goes into the interface and controls, you can ignore targets you don’t want to dig.

Most detectors are set up for specific types of hunting. For example, the settings on gold detectors like the Nokta Makro AU Gold Finder take into account the hot rocks and ground that are encountered in a goldfield. Some of the newer detectors, like the Garrett AT Max or Minelab Equinox Series, are set up to be used in multiple soil types with preset programs that change settings fairly easily.

Pulse Induction (PI)

While the previous types of metal detector technologies used two coils working together, Pulse Induction (PI) can use one or more coils in a much different way. The coil sends out bursts of electronic currents that bounce back when it hits a metal object. The best way to think about PI is that it’s like a bat’s echolocation. There is no way to tell the difference between targets – just that there is one.

The greatest advantage to these types of detectors is that they search much deeper than the BFO or VLF. If you plan on searching for very deep targets a detector such as the Garrett Gold Master 24K will give you the best results. Many beach and underwater detectors, It is very stable and reliable at finding targets even in the salt found in beach water and sand.

There are many metal detectors on the market for a wide range of needs and experience levels. It’s easy to get overwhelmed or choose one that does more than you will ever need it to. Finding the detector that fits your needs boils down to choosing the features you need.

Minelab CTX 3030

Powerful device with treasure detection in mind to help treasure hunters find golden and valuable treasures.it has the latest technological features such as wireless sound system, water resistant full color display, iron and conductivity target resolution, target finding thanks to GPS, ergonomic design, multilingual content. In addition, Minelab CTX 3030 is compatible with the new XChange2 program, which allows storing the places, photos and comments detected by your metal detector in a single file.

Impact Metal Detector

Unique multi-purpose and high-performance device in all-natural conditions.it combines multiple detectors in one and utilizes cutting edge technology, enabling a unique yet easy-to-use detector experience for new to experienced prospectors.

Impact metal detector comes 12 search modes designed to hunt out different targets such as coins, relics and deep treasure caches. It also operates extremely well in different terrains including but not limited to wet beach sand and parks, allowing you to search without any further adjustment if you wish.

Powerful operating frequencies, online firmware update capability and robust design. If you are looking for depth and advanced discrimination ability.

Impact metal detector Features:

1- Multi-Frequency Technology

Impact Metal Detector technology, the first of its kind (which was later implemented in Kruzer and Anfibio),included the versatility of the device and its suitability for the various purposes of the prospectors, as well as the saving money, where there is no need to buy three detectors for metals for each frequency.

2- 12 different modes of multiple uses

Impact metal detector software program includes a wide range of different search modes. Search mode is a set of different settings prepared in advance within different values of sensitivity and ground balance and other values ​​to fit a particular goal or the nature of the terrain and so on.

3- Digital ID – Target ID

Impact Metal Detector digital target ID is a specific number displayed on the screen of the device. This number reflects the nature of the target in terms of its type of metal It gives the prospector an idea of ​​the nature of the metal type of the buried object and the target ID number ranges from 00 to 99, where the target ID is used to distinguish a target type from another particular type.

4- Ground Balance

Impact Metal Detector ground balance is a calibration process performed by the device to ensure that the results are accurate, the user of the device first and before any use must perform ground balance in the desired search area to get best results.

5- Filter a Specific Target ID Range

Filtering is possibility to limit the search within a given range of Target ID values ignore a specific range. This feature is very important for gold seekers,

6- ISAT feature

iSAT (Intelligent Self-Adjusting Threshold) enables stable fixed use of the Impact metal detector by eliminating or ignoring the faulty signals usually produced by searching within areas with large mineralization and hot rock areas.

7- Tone Break

A useful feature for the user is the Tone Break feature which enables the user to assign different audio tones to each specific range of digital target ID values. The advantage of this feature is that a particular tone can be assigned to a field that corresponds to the value of for example gold, when the user hears a specific tone, the prospector can know the type of the target without looking at the screen.

8- Simple User Interface with Many Options

The device settings can be easily adjusted via the program of the device and using the control panel buttons under the screen. All the options and settings of the device are in one screen where you can choose the search modes, search frequencies and other settings on the same screen using the buttons.