Best Gold Detectors 2024 For Sale, Get Treasures, Water and Metal Detectors At Best Price


Find Gold in the Desert

Find Gold in the Desert

Find Gold in the Desert

Find Gold in the desert has many challenges that are unique to this harsh environment. Primarily, it is the lack of water, or more specifically, the inaccessibility of water to process material using traditional alluvial mining methods.

Of course, there are many gold-bearing areas that are in arid desert environments. And while it may be true that tools like sluice boxes certainly aren’t going to work here, there are several options to allow you to find gold in the desert.

Metal Detecting

Using a metal detector is one of the most popular methods to find gold in the desert, metal detectors are still used very successfully to locate gold nuggets. They don’t require any water to use, and modern gold detectors have gotten quite good in recent years.

In the desert, gold nuggets often aren’t very deep. In fact, there is often exposed bedrock that can be found in many desert environments, so a sensitive detector is often the best choice for many locations, rather than the more expensive pulse induction detectors.

When deeper soils or highly mineralized ground is encountered, a good PI detector is your best bet. Minelab metal detectors are still a favorite and are successfully find gold nuggets around the world.


Drywashers are a piece of mining equipment that every desert gold prospector should own. Rather than using water to move material and allow gold to settle out of the gravels, they use vibration and air pressure to do the same process.

Capture rates for drywashers are not as good as methods like sluicing or panning, but they are the only decent option in many dry locations. And although they have lesser recovery rates, you can feed material into them rather quickly, which can make up for the reduced recovery.

The dirt that you run through a drywasher should be completely dry. If it isn’t, the gold will get stuck in the dirt and be easily lost. If the ground is too wet, you will need to wait until the weather warms up and thoroughly dries out the soil.

Since even the best drywasher will lose a certain amount of gold, it is always a good idea to scan over your tailing piles with a metal detector every once in a while, just in case a nice nugget got lost. Most prospectors use drywashers in combination with a good metal detector to maximize efficiency.


Crevicing is a very simple method that you can use to find gold in the desert. This method simply involves carefully cleaning out cracks in the bedrock, often using just basic hand tools, and later panning out the concentrates that you collect.

Crevicing is slow work, and you don’t process large amounts of material like you do with other mining methods. However, if you are in a good location you will be getting very high quality concentrates that should be loaded with fine gold. The trick is to find gold in a rich area to crevice.

So how do you find a good location? Often the best crevicing locations are places where you have already find gold nuggets with a metal detector, but the shape and texture of the bedrock creates conditions where crevicing is needed to thoroughly “clean out” the location.

One great tool to use for crevicing is a modified dry vac. These are a great investment and can do an awesome job of cleaning out those deep cracks.

Hard Rock Mining

Most of the gold that has been mined in the desert comes from hard rock mines, where gold is extracted directly from the rocks. There are still considerable hard rock gold deposits out there that can be mined by the small-scale gold prospector that have not yet been discovered.

The startup cost of most hard rock mining operations is too expensive for most prospectors, but that doesn’t mean that you can’t do some hard rock mining on a smaller scale. All you need is a simple rock crusher that you can break apart the ores for further processing. This way you can collect rock samples and break them up to see what they contain inside.

This method will take some research to learn to identify what gold-bearing rocks look like in your mining area. Different mining districts will have different ores that will be of interest. The most important thing for the small-scale prospector to keep in mind is that the gold needs to be large enough to be visible, so you can then use a simple gold pan to separate out the crushed gold.

Minelab Equinox

With full-waterproofing and multiple frequency modes, this excellent gold detector is ready for all valuables in all sorts of environments. Sometimes a company just hits on a slice of perfect and if you’re after a personal basset hound for the bullion, then the Minelab Equinox is a detector you can’t afford to ignore. Historically, when you bought a metal detector, you picked a frequency and worked within it, but not so here.

The Equinox is one of the most versatile machines out there. With multiple simultaneous frequency responses from 5 – 40 kHz, this detector is as capable of nosing into a patch of gold as it is turning up ancient coins, spearheads, and jewelry—all without committing to a mode in advance. That picture is completed with solid target ID’s that keep you from digging up nails when you’re looking for pieces of eight.

The Equinox offers a great combination of automatic settings and options for manual tuning. With its four distinct detection modes, it’s as easy to set it for beach hunting, as it is for the mineralized mountain soils where gold is usually found.

It also comes with 8 custom search profiles and allows you to save the settings you most frequently use. Advanced settings allow you to tweak how much target audio you hear. The LCD display sums it all up concisely with simple controls that let you instantaneously adjust detect modes and frequency. Special accessory coils for specific situations are also available to expand your range.

Garrett ATX 

With superior sensitivity even for deeply buried objects, salt water immunity, and great resistance to interference, this is a PI detector that’s perfect for rugged environments and mineralized soils.

A draft-horse of the metal detection world, the pulse induction Garrett ATX is a powerful instrument built for deep discoveries in rough environments. Using PI tech, the ATX is built for going deeper and find gold in rougher locales.

This is a stacked instrument with lots of modes and capabilities that will become second nature with time. The ATX leverages a multi-frequency mode to cut deeper into the ground and uncover more metal. It features 13 sensitivity modes, a capable ground-balance function that takes mere seconds to calibrate to the soil you’re working with, as well as ground tracking. Together, the ATX easily cuts through salty soil, seawater, and mineralized crusts. The iron check feature is another nice capability that audibly checks whether an item is iron, and the pinpoint feature helps you lock onto and find gold nuggets that you’d like to investigate.

The ATX is indisputably rugged but it’s also heavy—three times as heavy as some of the other leading detectors we follow. However, it’s also sturdier than most. It’s submersible up to 10 feet and won’t be affected by salt water or dust. All in all, if you want a rugged detector that leads the pack in terms of detection depth, this PI detector is it. You’d have to spend considerably more on something like the ultra-premium Minelab GPZ series with its ZVT tech to exceed it.

Leave a Reply

Your email address will not be published. Required fields are marked *

Do You Have Any Questions?

Feel Free To Contact US

Please enable JavaScript in your browser to complete this form.
gold detectors USD $
gold detectors TRY TL
gold detectors EUR €